SKIN ARMOR ROLL
search
  • SKIN ARMOR ROLL
  • SKIN ARMOR ROLL
  • SKIN ARMOR ROLL
  • SKIN ARMOR ROLL
  • SKIN ARMOR ROLL
expand_less expand_more

SKIN ARMOR ROLL

Clear bicycle frame protection - Gloss finish

The Skin Armor roll is a 15-metre transparent flexible polyurethane protective film specifically developed for frames and components with a glossy finish. It protects your bike from scratches and rubbing.

The Glue Shield technology requires no liquids, so it's quick and easy to apply.

This roll can be cut to any length and used to cover several bikes.

The Skin Armor is resistant to water (high-pressure washing), tearing, perforation, peeling, UV rays and temperature variations. It's the ideal solution for cyclists looking for an effective, discreet solution to preserve their bike's appearance and resale value.



Quantity
€83.29
place FIND A RESELLER

High resistance

No rips. Excellent resistance to puncture and peeling.

UV resist

Does not change colour with time.

Washable

Resistant to high-pressure water jets.

Temperature fluctuations resist

From -30°C to +100°C / From -22°F to +212°F.

Glue shield technology

Quick and easy dry fitting. High adhesive strength.

They approve

Characteristics

Material
Polyurethane
Dimensions
162 x 150 x 62 mm
Colors
Clear
Width
58 mm
Thickness
250 microns
Product reference
2604
Finish
Shiny
For
Frame and fork

Our advices and commitments

Mounting instructions

1. Wash your hands.
2. Apply on a clean bike.
3. Degrease the surface to be protected with a fast-evaporating solution (such as isopropyl alcohol), and dry with a clean cloth.
4. Measure the dimensions of the surface to be protected, then transfer them to the skin armor.
5. Cut out the shape using scissors, taking care to round off the corners.
6. Separate the Skin Armor from its protection so that only the transparent adhesive remains.
7. Locate the spot and apply the patch. The protection remains repositionable.
8. If the position suits you, rub the patch with a soft cloth to remove air and ensure perfect adhesion to the substrate.
9. Dispose of the non-adhesive protection in the selective waste bin for better recycling.

Directions for use

The Skin Armor protection can be removed cold or with heat (hairdryer).
Remove gently and gradually. If glue residue remains, clean with alcohol.
Dispose of the used protection in the selective waste bin. This product can be recycled.

Engineered

Product designed by our R&D department in France.

Quality commitment

The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department.

Questions and answers

Complementary Products