Temperature fluctuations resist
From -30°C to +100°C / From -22°F to +212°F.
Glue shield technology
Easy to install. High-resistance adhesive.
No rips, non-crack and secure attachment.
« Very effective frame protection stickers that are easy to apply and do the job well. »
« It is a very thin film that goes unnoticed once correctly installed, making it practically invisible. Obviously, being also designed for MTB, it resists water and temperature changes. »
« As soon as the bikes are assembled, we glue the Skin Armor. We protect the places most exposed to shocks on the frames: under the down tube, chainstay, behind the crankset (chain jump), transponder location. The pre-cut kits are perfect for not thinking too much about cutting the protections. Very resistant to impacts and scratches, it has the advantage of not leaving any trace when taking off. »
Lucas Fouquet mechanic of the FDJ - Nouvelle Aquitaine - Futuroscope team.
Enduro / DH
Road / Triathlon
- 250 microns
- Product reference
- S : (ref. 2603) / M (ref.2600) / L (ref.2601)
1. Wash your hands.
2. Clean the bike frame.
3. Peel off the adhesive protection.
4. Paste the patch on the dry frame.
5. Rub the patch with a soft cloth to flush the air.
Simply use the heat of a hair dryer to loosen it, then the adhesive residue can easily be removed using a little alcohol.
Product designed by our R and D department in France.
The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department.