Find a reseller
expand_less
expand_more
I'm
Z BAR TOOL
Multi-tools and tubeless repair kit stored within the handlebars
The Z Bar Tool is a complete troubleshooting solution for all mountain bikers (Cross Country, Enduro, etc.). In total, 15 functions are stored in your handlebars. These tools have been specially developed to fit most handlebars on the market (see installation instructions). Lightweight and discreet, these handlebar inserts will make you forget all about them right up until the moment you use them. The expander fixing system ensures a perfect fit, even in the roughest terrain.
Z BAR TOOL
Sleek finish
Anodised and CNC usined aluminium handlebar end plugs.
Easy to pull out
Multi-tools accessible with gloves.
Complete multi-tools
11 screws bits
Tubeless repair
Ergonomic Tubeless repair tool & Presta valve core removal tool.
Chain link and Presta valve core holder
Presta valve core supplied. Possibility of fitting a spare chain link.
Characteristics
- Weight
- 67g + 36g
- Material
- Steel and anodised aluminium handlebar end plugs
- Dimensions
- 120 mm x Ø 17.5 mm (excluding end plugs); 143 mm x Ø 17.5 mm (excluding end plugs)
- Product reference
- 4310
- Plugs
- Yes (3 x Ø 2mm)
- Handlebar compatible
- Internal diameter from 17.5 mm to 21 mm
- Tools included
- Hex2/2.5/3/4/5/6/8; T10/25; ϴ4; Ꚛ2
The advantages of this accessory
Sleek finish
Anodised and CNC usined aluminium handlebar end plugs.
.jpg)
.jpg)
Easy to pull out
Multi-tools accessible with gloves.
Complete multi-tools
11 screws bits: Hex2/2.5/3/4/5/6/8; T10/25; ϴ4; Ꚛ2
.png)
.png)
Chain link and Presta valve core holder
Presta valve core supplied. Possibility of fitting a spare chain link.
Our advices and commitments
Mounting instructions
1. Check that your handlebars are compatible with the dimensions of the product before proceeding with installation. Internal diameter between 17.5 and 21 mm over at least 143 mm.
2. If access to the inside of the bar is obstructed by your handles, it may be necessary to remove the handlebar end plugs or cut out the grips.
3. Position the end cap containing the Tubeless repair tool, whichever side you have chosen. Tighten the handlebar cap clockwise by hand. Repeat the same operation with the second end cap.
Directions for use
1. Turn your wheel to find the air escaping. Extract any object still in there causing the puncture.
2. Insert the plug through the eye of the needle.
3. Insert the needle tool into the hole using the file to clear it if needed.
4. Forcefully pull out the tool by turning your wrist.
5. Reinflate the tyre if required.
The plugs supplied in these kits are recommended for punctures between 1 and 5mm. For smaller punctures, we advise you use the Z Sealant range and for anything larger, to change the tyre. The user can chose to plug the tool in advance with a diameter they see fit in order to save time.
Maintenance instructions
Check the condition of the plug and its strength before each outing.
Engineered
Product designed by our R&D department in France.
Quality commitment
The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department.
