TUBELESS TANK

Tubeless air tank

The Zéfal Tubeless Tank stores air from the floor pump and quickly delivers it to the tyre meaning it is effective and effortless to attach a tubeless tyre.
A single pump action releases the air stored in the tank using "Boost Air System"; fitting the tyre onto the rim immediately and without any loss of pressure. The aluminum tank can hold a pressure of up to 16 bars.
The Zéfal Tubeless Tank is autonomous as well as being easy to carry using its handle. The direct connection ensures a seal with the valve without any flow loss.
In order to inflate the tank, we would recommend using a floor pump with a minimum capacity of 10 bars like those in our Profil Max range.

Quantità

74,96 €

TROVA UN RIVENDITORE

TUBELESS TANK

Boost air system

Instant inflation and rapid fit of tubeless tyre onto rim.

Valve tool supplied

For removing Presta valves.

Direct connection

Direct connection without any loss of flow.

Autonomous

Does not require electricity. Enviromentally friendly and silent.

Easy to carry

Ergonomic handle.

Approvano

^«The nozzle uses a system that attaches to the wheel valve by pressure and that we found convenient and quick to use, as well as quite safe when it comes to maintaining the air. (...)It is not necessary to have the pump connected in order not to lose the air inside, so it can be transported "preloaded" with pressure to attach a tubeless tyre. _»

esmtb.com

^«This Zefal Tubeless Tank works perfectly for fitting tubeless tires to all types of rims. I have tested many rim and tire combinations, I have never failed. _»

Matosvelo

Specifiche

Peso: 1,6 kg
Materiale: Termoplastico ABS
Raccordo: Diretta Presta
Lunghezza del tubo: 1000 mm / 39’’
Codice del prodotto: 4300
Recommended Pressure: 10 bar / 145 psi
Massima pressione: 16 bar / 230 psi
Serbatoio: alluminio
Capacità di serbatoio: 1 L
Finitura: Poli glacé

Consigli e impiego

Engineered

Product designed by our R&D department and made in France.

Quality commitment

Commitment to quality is one of our major concerns. We carry out stringent testing on pumps, especially on floor pumps. Our different models must successfully pass the following test: 100 inflation cycles of a capacity of 650cm3 at a pressure of 0 to 10 bars and 20s between each inflation cycle.